ACCESSPORT TUNING
Single-fuel AP tune
$400 USD
One agreed fuel on a supported COBB Accessport setup.
Includes up to 8 revisions within the approved scope, plus your private order page for files, logs and messages.
TUNED BY KEITH / CUSTOM TUNING & MAPS
Choose a tuning package, enter your vehicle details and pay securely through QuickBooks.

Not sure which platform or fuel option fits? Start with the service finder, or open the vehicle and equipment guides below.
STANDALONE / TRACK & RACE CONFIGURATION
Choose the tools you want to add to your standalone setup. Group the tools you need into a package, available as a separate configuration service or an add-on to your tune.
Each feature is scoped around the exact ECU model, firmware or package, current calibration, gearbox, required sensors and activation controls. Your quote defines configuration work, testing, validation and any follow-up adjustments. Feature availability depends on the ECU and installed hardware.
Hardware, wiring, software licenses, dyno or track time, travel and a full engine tune are separate unless listed in your quote. These are track and competition configuration services; activation limits and validation are agreed for the vehicle before use.
Already tuning with Keith? Include your order reference in the inquiry so the feature work can be quoted alongside your existing job. Your selected features are quoted together as a package, based on complexity and customization needs.
THE WORK BEHIND THE SERVICE

SUBARU / FACTORY ECU
The featured setup reported 388 whp and 417 wtq. Explore the supporting hardware and the separate stages of the car’s development.
See the WRX build →
EMTRON / STANDALONE
Three SI-Drive power modes and a documented 564.5 hp E80 report. Lucas’s owner update describes a trouble-free 700-mile drive home.
See the STI and owner’s update →Historical builds from Keith’s AWD Tuning work. Photos can predate later tuning stages; each build page identifies its records. Results apply to the featured cars and are not promised outputs for another setup.
ECU & DATALOG TROUBLESHOOTING
No-start, unstable idle, sync loss or a log that doesn’t make sense? Send me the symptoms and setup so we can define the next checks.
Review of an accessible ECU configuration and relevant logs, focused on the issue we agree to investigate. I’ll explain the findings and the next checks to carry out with the car.
Where suitable, arrange a remote session with you or your technician for ECU setup, sensor checks or first-start troubleshooting. Software access, equipment and the person working at the vehicle are confirmed in advance.
Quoted before booking. Send the vehicle, ECU, symptoms, recent changes and any available logs. We agree on the review or session, price and deliverables before payment. A full tune, repairs and additional investigation are separate; some faults require physical inspection.
Ask Keith about troubleshooting →FROM CHECKOUT TO FINISHED TUNE
Select your service, enter your vehicle details and pay through secure QuickBooks checkout. If you need help choosing, send a free inquiry first.
I review your hardware, fuel and ECU before preparing your file. Any additional work or cost requires your agreement. Unsupported setups can be refunded before work begins.
For Accessport tunes, send the requested logs for review and revisions. For standalone remote tuning, coordinate your four one-hour live sessions with Keith, subject to availability. Files, instructions, messages and logs stay on your private order page.
A base map is a starting calibration; follow-up tuning is separate. Hardware, licenses, diagnostic work and in-person sessions are quoted separately.
Choose my service →DELIVERY & REVISIONS
Standalone remote tuning: four one-hour live tuning sessions are included for the approved setup. Session dates are coordinated with Keith and depend on availability. Extra session time and additional project work are quoted separately. Have the vehicle, ECU software, connection and requested equipment ready for the agreed session.
Accessport file delivery: initial map delivery and each agreed tuning revision are usually completed the same business day and will not exceed one business day once everything needed is received.
This turnaround applies to each file delivery or revision, not completion of the entire tuning process. Time spent collecting logs, supplying missing information or resolving vehicle issues is separate. I’ll explain what is needed if work cannot proceed.
Accessport single-fuel tunes include up to eight revisions; Accessport flex-fuel tunes include up to twelve revisions within the approved scope. Standalone remote tuning includes four one-hour live tuning sessions, scheduled subject to availability. Hardware or fuel changes, diagnostic work and additional revisions may require a revised scope agreed before work continues.
BEFORE WE GET STARTED
Yes. Choose a service above, enter your vehicle details and continue to secure QuickBooks payment. Your paid order enters my queue; I review compatibility before preparing or releasing a file. If you need help choosing, the inquiry form is free.
Choose AP for an Accessport calibration or standalone for an aftermarket ECU, then select single fuel or flex fuel. Retunes are for an existing Keith calibration. A base map is a starting calibration, not a complete tune. Hardware, licenses, diagnostics and unusual combinations may require a separate quote. Ask first if you are unsure.
Standalone remote tuning includes four one-hour live tuning sessions for the approved setup. Agree on dates with Keith before planning dyno time or other bookings; sessions are subject to availability. Hardware, licensing, diagnostics, track features and extra session time are separate unless included in your quote.
Usually the same business day, and within one business day once I have everything needed for that step. Initial delivery requires setup approval, confirmed payment and complete vehicle information. Revisions require the requested usable logs and feedback. Business hours are Monday–Friday, 8 a.m.–6 p.m. Pacific.
Send your year, make, model and goals using the four-field inquiry form below. Add technical details if you know them; I will help identify the next step. You can also Call Keith: (714) 367-4201.
NEED THE DETAILS?
Vehicle guides, equipment requirements and package options are here when you need them.
START HERE
Choose your vehicle or project. I’ll help you confirm the setup, choose the service and plan the tune.
Choose your generation for pricing, preparation and datalogging requirements.
Modern COBB tuning or vintage engines with Kinsler and standalone management.
Find model-specific coverage for supported factory-ECU applications.
Emtron, Haltech, MoTeC, Link or MaxxECU setup, tuning and ECU packages.
Work with Keith in person or coordinate a tuning visit at your local facility.
Calibration consulting, project support and business services through Calibrations LLC.
Not sure which route fits? Send your setup to Keith. Need a starting calibration? Explore base-map services.
FIND YOUR TUNING PLATFORM
Explore model and trim coverage for Subaru, Porsche, Mazda, Ford, Nissan GT-R, Toyota trucks/SUVs, Volkswagen, Audi, Honda, Acura and other supported applications.
View COBB coverage ↗EcuFlash and RomRaider inquiries are reviewed against your exact ECU, ROM definitions and interface. For supported FA20 and FA24 WRXs, explore Atlas tuning.
Review my open-source setup ↗Exact year, engine, transmission, market and ECU support are reviewed before file delivery. Ask before checkout if compatibility is uncertain. Hardware, licenses and tune files are specific to the selected platform.
ATLAS / FACTORY ECU TUNING
Atlas WRX tuning: compatibility, process & quotes →
Work directly with Keith on a custom Atlas calibration for a supported 2015–2021 FA20 WRX or 2022+ FA24 WRX. Start with your hardware, fuel and driving goals; I confirm the exact ECU, transmission and market before we agree on the tuning plan.
Discuss remote tuning through requested logs and feedback, or a coordinated in-person session. We agree on the fuel, hardware, revision scope and delivery plan before work begins.
Ask about an Atlas tune →Send your model year, transmission, market, ECU/ROM ID, Atlas version and adapter model. Include your current tuning platform and any engine or ECU swaps. Logging equipment is confirmed for your combination.
Read the Atlas setup guide →Atlas pricing and any licensing or hardware costs are confirmed with your quote. The Accessport prices above apply to those services. No payment is required to ask about Atlas.
Moving from an Accessport? Discuss the transition before changing files or returning to stock, especially on a modified car. Atlas does not use Accessport maps or the Accessport as its interface. Atlas is not currently offered here for EJ/STI applications.
PORSCHE TUNING
Explore my Porsche work: custom tuning for supported COBB applications, plus vintage 964 4.0-liter engines, Kinsler throttle systems and standalone calibration with MaxxECU, Emtron Shadow and MoTeC.
For owners, engine builders and restoration shops. Remote support, dyno sessions and worldwide travel are scoped around the project.
Explore Porsche tuning ↗FIND YOUR CUSTOM E-TUNE
These dedicated guides explain the service, preparation and logging requirements for your Subaru.
A custom tune for your VB WRX.
Single-fuel AP $400 · Flex-fuel AP $600
View tuning details ↗Your FA20 WRX, tuned as a complete setup.
Single-fuel AP $400 · Flex-fuel AP $600
Explore this service ↗Subaru roots. A tune for your particular EJ.
Single-fuel AP $400 · Flex-fuel AP $600
Explore this service ↗STANDALONE ENGINE MANAGEMENT
Understand the tuning process, what information to prepare and the builds behind my experience. Standalone tunes are $500 for single fuel or $750 for flex fuel. Hardware, installation and additional project scope are quoted separately.
Subaru flex-fuel projects and LS-swapped Nissan experience. Review the installed ECU, wiring and calibration needs.
Explore Link tuning →Subaru development and street-oriented builds, with sensors, control strategy and drivability considered together.
Explore Emtron tuning →Plan wiring, sensors and engine hardware before calibration. See the requirements for your installed system.
Explore Haltech tuning →Review your ECU configuration, fuel system and control requirements, including vintage Porsche engine projects.
Explore MoTeC tuning →Explore MTune preparation and my large-cam Porsche 964 project with Kinsler hardware.
Explore MaxxECU tuning →Tell me about the engine, intended use and features you need. Discuss hardware and tuning packages before buying.
Compare standalone options →IN-PERSON TUNING · WORLDWIDE
Request a dyno session for your vehicle or host me at your shop. Worldwide travel visits and coordinated dyno days are quoted around your location, vehicles and facility.
Explore dyno & travel tuning ↗FORD / COBB ACCESSPORT
Check the tuning route, equipment and information needed for your exact Ford before ordering.
Ford tuning requirements and next steps →SUBARU ENGINE MANAGEMENT / HARDWARE PACKAGES
2004–2021 STI · 2002–2014 WRX. Choose ECU-only supply or a complete package, then select your vehicle and hardware. Review your selection before sending it to Keith.
Select every field to continue. Your selection carries into the inquiry below; no payment is taken.
Prices are USD for the listed hardware on standard USDM manual applications. Installation, tuning, shipping, sales tax and additional wiring, fittings or mounting supplies are separate. Availability and fitment are confirmed before payment. Manufacturer competition-use restrictions apply; these packages are not advertised as emissions-certified road replacements.
PREPARATION & FUTURE PRODUCTS
Tuning guides & printable checklists →
Equipment & preparation · Accessport flashing & logging
STI & EJ WRX / WIDEBAND FAQ
EJ remote tuning requires an external wideband with an approved way to record AFR or lambda alongside the engine log. A factory oxygen-sensor reading, gauge display or gauge video does not replace that recorded data. Confirm the controller and logging connection with me before buying equipment.
A factory AFR reading or commanded fuel target is not a substitute for the external measurement I request for your tune. I use the wideband record to assess actual mixture with engine load, RPM and the rest of the log. Factory sensor behavior and the available channels vary by ECU and ROM.
No. A gauge is useful for the driver, but I need recorded measurements that can be related to the engine log. A video or screenshot does not replace that data. Depending on the setup, this may mean an approved ECU input, a supported serial connection, or a separate logger with an agreed synchronization procedure.
Do not assume it will. iWire specifically identifies a post–Green Speed limitation for its AEM kit's ECU-input logging approach. That does not mean an external wideband cannot record independently; it means the harness, ECU input and current tuning software must be checked together. I confirm a workable method before you purchase a kit. See the COBB Green Speed guide and iWire's compatibility notice.
The planned option is for 2017-and-earlier WRX/STI applications. This EJ section covers the 2002–2014 WRX and 2004–2017 STI within that range; 2015–2017 WRX applications need their own FA-platform fitment review. For 2018+ vehicles, contact me for a separate logging plan. Model year alone does not verify a harness or software connection.
I review both existing legacy COBB configurations and compatible open-source/standalone setups. Send the exact kit, wiring, ECU/ROM and software details first. Legacy hardware support is not a promise that a current COBB software version can edit or use every older configuration.
Yes, subject to approval of the exact controller and logging setup. Innovate LC-2 provides programmable analog outputs and a serial logging path. Zeitronix Zt-3 offers a configurable analog output and serial datalogging. Those features do not automatically establish compatibility with your Accessport, ECU input or logger. Confirm the complete kit, including its matching sensor and required interface.
Follow the manufacturer's installation and calibration instructions. Verify sensor/controller compatibility, power and grounds, sensor placement, warm-up, absence of exhaust leaks and the exact output scaling. Send a sample log first so I can check that the recorded value agrees with the controller/display. Do not substitute another brand's voltage-to-AFR formula.
Use the units requested for your tune and identify them clearly. AFR displays depend on their configured fuel scale; do not assume an AFR number is directly comparable across different fuels or device settings. Keep the controller, gauge and logger settings consistent.
Do not remove required emissions sensors or disable diagnostics to make a logging kit work. Ask me and your installer to confirm a suitable sensor location and supported data path for the vehicle. An adapter harness does not establish emissions compliance.
Full-load remote fueling work waits until we have an approved measurement and logging method. We can discuss installation help or a dyno session with suitable instrumentation. Do not perform a pull just to see what happens; follow the instructions issued for your specific map and collect data only in appropriate, controlled conditions.
PLANNED HARDWARE / NOT YET FOR SALE
For 2017-and-earlier WRX/STI applications, I plan to offer Innovate- or Zeitronix-based packages that bring the controller, matching sensor, vehicle-specific wiring and logging instructions together. The aim is a clearly documented installation and useful data from the start.
LC-2 is a candidate for a controller-based setup. Exact controller, sensor, display options and logging interface will be selected and validated before release.
Manufacturer LC-2 documentation →Zt-3 is a candidate for AFR/lambda logging with optional display arrangements. Exact hardware and compatibility will be documented for each package.
Manufacturer Zt-3 documentation →Pricing, availability and fitment are not finalized. No preorders or universal plug-and-play claim. Before sale, each kit needs a verified vehicle/ECU/software matrix, installation instructions, output scaling, a sample-log check and a complete parts list. These are planned Tuned by Keith offerings, not an announced iWire partnership.
Ask about a wideband package ↗PAYMENT OPTIONS
Choose a service and enter your setup to open secure QuickBooks checkout. Eligible customers can apply to pay over time with Affirm when it is offered on the invoice. Choose Affirm at invoice checkout when it is offered, then review the available payment plans before you decide.
Payment options are subject to eligibility and approval. Rates, terms and any applicable fees are shown during checkout. Availability can vary by invoice and customer; financing is not guaranteed.
Your tuning scope and delivery process stay the same: work begins after your setup is approved, payment is confirmed and the required information is received.
Discuss my setup ↗CUSTOM PROJECTS & FITMENT QUESTIONS
Tell me what you drive, what you want to improve and which service interests you. Unsure about the tuning platform? Choose “Help choosing.”
Prefer a conversation? Call Keith: (714) 367-4201.
Review the service terms, file license and refund policy and our privacy policy. Provide complete vehicle details at checkout. Ask Keith before paying if your platform, hardware or service scope is uncertain.